Scroll sawing is one of the methods of applying the pattern onto the wood and making cuts according to the patterns. If you are a professional, it is an easy work to use this process in making the cutting. But if you are new to the scroll saw pattern making, making the pattern is a tough job and making the cut on these patterns is equally tough. Hence beginners face many difficulties in making the patterns and in making the cuts. A few tips are provided for beginners on what to do and what not to do while using the scroll saw for making patterns and to make exquisite designs according to the patterns.
What Not to Do?
Beginners should first know that they should not trace the design on the paper using a tracing paper nor should they use a pencil to make the drawing. By drawing it straight onto the wood, it may weaken the area. Even by using the tracing paper, it may weaken the area and the lines will not be finely drawn nor can the cut be made as straight or curved lines but they occur as jagged lines. Hence, depending on the work at hand, the drawing should be made. As they are new to the scroll saw, making the drawing and then utilizing it to make patterns on the wooden pieces is necessary. However, by using the right technique, they can avoid making mistakes and in case mistakes are made, beginners should know how to rectify it.
What is to be Done?
Spray adhesive is the best solution to adhere the pattern to the wood.Best spray adhesive for scroll saw patterns usually come in cans. You can find them in the rack that sells glue in your supply store. Spray adhesives can be permanent types or temporary types. Spray adhesives can be chosen according to the intricacy of the cutting work, the requirement of a secure bond and the usage of a tape under the pattern. According to the need, the spray adhesive can be used. As a beginner using the scroll saw, the beginner should have everything handy and within reach, before starting his work. By following a systematic pattern of making the cut, he can avoid mistakes. After working on a few pieces of material, the beginner will now gain expertise to do the work without any pattern making or adhesive usage.
While cutting the pattern using the scroll saw, the blade gets lubricated with the blue painters tape and this eliminates the possibility of the blade getting heated up and the wood from getting burnt. Once you get accustomed to the cutting work, you can also use a packaging tape, which is more economical. First copy the pattern, dry-fit the pattern to the wood and then, apply blue painters tape on the pattern, so that it covers the pattern entirely. To protect the pattern from over-spray, you can use a large, empty carton, on which you can place the pattern, before spraying, so that any overspray can be caught. Each brand of adhesive takes up different timings to set, and hence, care should be taken while using a particular brand, which can be checked and tried only by using them. Once everything is done, you can just remove the blue painters tape. The tape just peels off and it looks great without any trace of the tape. There are certain people who apply the packaging tape directly onto the surface of the wood without using the blue painters tape at all.
Double Side Tape
The double side masking tape is also known as “dropcloth tape”. It avoids any type of messiness involved with the spraying process. It is easy to use and once the spraying is over, the pattern just holds on to the intricate design without affecting the pattern. The masking tape just comes out and does not affect the pattern nor does it leave any trace on the pattern. Before using the double sided tape, the pattern should first be copied and dry-fitted into the wood. The double side masking tape should then be placed over the entire board. The protective masking present in the tape should then be peeled away and the pattern should be applied over the tape. It is a very easy method of doing the pattern without any messy work being involved. Another method is to print the pattern on the adhesive labels directly and can then be cut. No additional tape is required to lubricate nor are there any traces left.
Adhesive Labels using Full Sheets
Beginners can also learn to make their printing on the entire sheet of the adhesive labels. The pattern can then be applied in a neat and clean way that helps in easy cutting. It does not require any additional tape, as the lubrication for the blade is received from the adhesive tape. It is an economic way of making patterns, especially as beginners have a tendency of making mistakes and causing unwanted accidents. Glue sticks can also be used to the patterns, to fix them on the wood. Glue sticks that are water-based give a good finish, as they can be wiped clean, easily.
To learn more about scroll saw and making patterns for a beginner using spray adhesive, the user can click here at our website at http://www.tablesawz.com/best-scroll-saw/. Using the scroll saw makes woodworking, a fun job to be done. It gives the user a sense of power to see the various patterns and designs shape out so beautifully on the wood work material or other material like plastic. One important part of using the scroll saw is to apply the pattern. This is a special achievement that can be gained through experience. It is by applying the pattern on the wood that the work of cutting and designing can be started. However, the work is yours and making beautiful patterns is your way of being creative and showing your talent. However for a beginner, using guidance in applying the pattern is the best way of learning the work easily and having the best spray adhesive for scroll saw patterns should be a must for beginners.